FRONT PANEL FEATURES AND CONTROLS
- The main switch is used to power up the amp.
- Ventilation openings are located at the front of the unit, so that hot air is prevented from being trapped inside the unit, thus causing faulty operation or even damage.
- The PROTECT LED light-up When the amplifier is in protect mode due to a short circuit, over, or thermal overload.
- The CLIP LED lights up when the signal is distorted. Should distortion occur, reduce the input level, so that the CLIP LED stops lighting up.
- The SIGNAL LED lights up as long as a signal is present at the input.
- The POWER LED lights up as soon as the unit is powered up.
- The Gain control (channels 1 and 2) is used for setting up the input gain.
REAR PANEL FEATURES AND CONTROLS
8. These are the balanced Main XLR/ TRS inputs (Channels1and2) and Signal link output (Channel 1 and 2).
9. These are the MODE switches, used to alter the operating modes as well as to set the limiters and high-pass filters.
10. The unit’s fan is located here. Fan speed adjusts automatically to assure trouble-free operation.
11. These are the speaker outputs (channels 1 and 2). When running the unit in mono-bridged mode.
12. These are the output terminals (channels 1 and 2). When running in mono, please make sure to use both middle connectors to connect your loudspeaker.
13. Power supply plug, accept a standard IEC terminated power cable
To prevent faulty operation, please assure that the unit is kept at a distance from other appliances emanating heat.
Reviews
There are no reviews yet.